在选择车间工作服的面料时，需要考虑以下几个因素：

When choosing the fabric for workshop workwear, the following factors need to be considered:

一、面料选择的五大核心指标

1、 Five core indicators for fabric selection

1.耐磨等级

1. Wear resistance grade

工业标准：通过惭补谤迟颈苍诲补濒别测试≥50,000次（重工业环境标准）

Industrial standard: Passed Martindale test ≥ 50000 times (heavy industry environmental standard)

工艺：高支高密编织、牛津纺、加厚斜纹

Recommended processes: high count high-density weaving, Oxford spinning, thickened diagonal weaving

2.透气性能

2. Breathability performance

关键参数：透气率≥5000驳/尘?/24丑（高温车间建议标准）

Key parameters: Air permeability ≥ 5000g/m? /24-hour (recommended standard for high-temperature workshops)

解决方案：蜂窝状织法、激光微孔技术

Solution: Honeycomb weaving method, laser micro hole technology

3.防污处理

3. Anti pollution treatment

技术：罢别蹿濒辞苍叁防涂层（防水/防油/防污）；纳米自清洁技术

Advanced technology: Teflon triple anti coating (waterproof/oil resistant/anti fouling); Nano self-cleaning technology

4.弹性要求

4. Elasticity requirements

动态测试：横向拉伸率≥30%（符合EN ISO 13934-1标准）

Dynamic testing: Lateral tensile rate ≥ 30% (compliant with EN ISO 13934-1 standard)

优选材质：氨纶混纺（5-10%含量）

Preferred material: spandex blend (5-10% content)

5.舒适度体系

5. Comfort system

接触舒适：翱别办辞-罢别虫?认证（无有害物质）

Comfortable contact: Oeko Tex? Certification (no harmful substances)

体感舒适：克重180-220驳/㎡（四季通用）

Comfortable feeling: Weight 180-220g/㎡ (suitable for all seasons)

在选择车间工作服的面料时，一般常用的面料有以下几种：

When choosing the fabric for workshop workwear, the commonly used fabrics are as follows:

1. 棉：棉是一种天然纤维，透气性好，吸湿性强，舒适柔软，也比较耐磨。然而，棉面料容易起皱，不易干燥，容易变形缩水，需要经常熨烫。

1. Cotton: Cotton is a natural fiber with good breathability, strong moisture absorption, comfortable and soft, and also relatively wear-resistant. However, cotton fabric is prone to wrinkling, difficult to dry, and prone to deformation and shrinkage, requiring frequent ironing.

2. 涤纶：涤纶是一种合成纤维，具有较高的耐磨性和耐脏性，不易变形，容易清洗快干，耐洗耐烫。但透气性较差，不易吸湿，容易产生静电，且手感硬，不如棉柔软舒适。

2. Polyester: Polyester is a synthetic fiber with high wear resistance and dirt resistance, not easily deformed, easy to clean and dry, and resistant to washing and ironing. But it has poor breathability, is not easy to absorb moisture, is prone to static electricity, and has a hard hand feel, not as soft and comfortable as cotton.

3. 混纺：混纺面料一般是将棉和涤纶等合成纤维混合在一起，兼具棉和涤纶的优点，具有较好的透气性和耐磨性，同时也具有较高的耐脏性和耐洗性。

3. Blended fabric: Blended fabrics are generally made by mixing synthetic fibers such as cotton and polyester together, combining the advantages of cotton and polyester, with good breathability and wear resistance, as well as high resistance to dirt and washing.

4. 尼龙：尼龙是一种较为耐磨的合成纤维，具有较高的强度和耐脏性，适合在工作强度较高的环境下穿着。但透气性较差，不易吸湿。

4. Nylon: Nylon is a relatively wear-resistant synthetic fiber with high strength and dirt resistance, suitable for wearing in environments with high work intensity. But it has poor breathability and is not easily hygroscopic.

根据车间工作环境的特点和员工的实际需求，选择适合的面料可以提高工作服的舒适性和耐用性，从而提高员工的工作效率和工作满意度。在选择面料时，可以根据上述因素进行综合考虑，并选择适合的面料来定制车间工作服。

Based on the characteristics of the workshop working environment and the actual needs of employees, selecting suitable fabrics can improve the comfort and durability of work clothes, thereby enhancing employees' work efficiency and job satisfaction. When choosing fabrics, comprehensive consideration can be given to the above factors, and the most suitable fabric can be selected to customize workshop workwear.

本文由山东工作服友情奉献.更多有关的知识请点击:我们将会对您提出的疑问进行详细的解答，欢迎您登录网站留言.

This article is a friendly contribution from Shandong Work Clothes For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message